Menene Jagorar Amfani da Kulawa don Kayan Aikin Magnetic Mai Ƙarfi na String String?

I. Umarnin Amfani 

1. Duba Kafin Aiki

- Tabbatar damaganadisusaman ba shi da tsatsa, tsatsa, ko gurɓataccen mai.

- Duba hanyoyin haɗin da aka zana don tabbatar da sahihancinsu don hana rabuwar ramin ƙasa.

- Tabbatar da ƙarfin maganadisu (misali, ta amfani da mitar Gauss) don tabbatar da cewa ya cika buƙatun aiki.

2. Aikin Rami

- Rage igiyar haƙa a hankali zuwa zurfin da ake so, don guje wa taɓarɓarewar da za ta iya faruwa ga rijiyar ko kifi.

- Lokacin da kake kusantar tarkacen ƙarfe, juya igiyar haƙa a ƙasan RPM (≤30) don haɓaka jan hankalin maganadisu.

- Dawo da igiyar cikin sauƙi bayan shanyewa don hana asarar tarkacen da aka kama.

3. Yanayi Masu Dacewa

- Ana amfani da shi sosai don dawo da kayan ferromagnetic (misali, gutsuttsuran bit, guntun casing). Bai dace da ƙarfe marasa maganadisu ba (misali, jan ƙarfe, aluminum).

- An ba da shawarar yin amfani da shi ga rijiyoyin tsaye ko ƙananan kusurwa; a cikin rijiyoyin masu kusurwa mai tsayi, a yi amfani da shi tare da mai daidaita tsakiya.

II. Jagororin Kulawa da Kulawa

1. Tsaftacewa

- Tsaftace saman maganadisu nan da nan bayan amfani da dizal ko wani sinadari na musamman don cire aski na ƙarfe da laka mai haƙa.

- A guji goge maganadisu da kayan aiki masu kaifi don hana lalacewar maganadisu.

2. Rigakafin Rushewar Magnetization

- A adana daga filayen maganadisu masu ƙarfi (misali, injina, injinan walda).

- Raba maganadisu da yawa tare da na'urorin raba sarari marasa maganadisu (misali, tubalan katako) don guje wa karo.

3. Dubawa akai-akai

- Auna kwararar maganadisu duk bayan watanni 3; a mayar da shi don sake caji idan ƙarfi ya faɗi da >15%.

- Duba zoben rufewa don ganin ko sun lalace (yana hana shigar ruwa da tsatsa).

4. Bukatun Ajiya

- A adana a cikin busasshiyar muhalli (danshi ≤60%, zafin jiki -20°C zuwa 50°C).

- A shafa man shafawa mai hana tsatsa sannan a naɗe shi da takarda mai hana danshi don adanawa na dogon lokaci.

III. Shirya matsala 

- Rauni a cikin sha: Tsaftace maganadisu ko sake caji idan an cire maganadisu.

- Lalacewar zare: Kada a tilasta haɗin gwiwa; gyara ko maye gurbin sassan da suka lalace.

- Rashin Kamun Kifi: Tabbatar ko kifin yana da ƙarfin ferromagnetic; canza zuwa wasu kayan aiki (misali, kwandunan shara) idan ana buƙata.

Don takamaiman sigogin aiki (misali, ƙarfin kaya, iyakokin zafin jiki ta hanyar samfuri), samar da samfurin kayan aiki ko yanayin rijiya don ƙarin jagora.

Junnie Liu

Wayar Salula/WhatsApp:+0086-158 7765 8727
Imel:landrill@landrilltools.com